0812-701-5790 (Telkomsel) Marine Surveyor PT.Binaga Ocean Surveyor (BOS)

0812-701-5790 (Telkomsel) Marine Surveyor PT.Binaga Ocean Surveyor (BOS)
MARINE SURVEY

Tuesday, October 18, 2011

[Oil&Gas] Some Vacancies at Tomori (upstream of Donggi Senoro) Sulawesi

 

Yth Pak Heri,
Mohon ijin meneruskan email teman yang belum mengikuti milist migas, tentang lowongan pekerjaan bagi rekan2 milist.
Bagi yang berminat dan akan bertanya tentang lowongan ini harap menghubungi Ketut Saguna [ketut.saguna@dayadimensi.co.id] cc ke nurinsan.kamil@dayadimensi.co.id
Mohon jangan dikirim ke saya.
Terima kasih pak Heri.
 
Salam,
Aji W
 

We are one of national oil & gas companies based on Jakarta, Indonesia. Due

to our recent project on Indonesia, we are looking for candidates to fulfill the

following positions:

A. FACILITIES ENGINEERING

1. Process Engineer

Review and comment on process design and engineering deliverables, and other related

disciplines' deliverables of the oil & gas production facilities prepared by Engineering

Contractor;

Review the process analysis and calculations, and implement government regulations, industry

standards, codes and good practices.

Select and specify the appropriate processing and rotating equipment, vessels, heat exchangers,

relief system, valve and piping systems for the facilities.

Ensure that the facilities, process, control and mechanical systems are designed, in accordance

with their specifications, codes and standards stated in EPC Contract and other facilities

Contractors; and when required by COMPANY to perform any engineering activities with

reasonable instructions.

Provide design, analysis and calculations required and requested by COMPANY Lead Engineer –

Process.

Min. requirement:

A bachelor science degree in chemical engineering

10 (ten) years experienced in oil & gas process design, and shall have ever been responsible for

and in charge of the design engineering and or construction of oil & gas facilities.

Well knowledge on the use and operating of the various computer softwares applicable to such

process designs.

Well familiar with the provisions of the codes, standards and recommended practices in oil and

gas industry such as GPSA, API, ANSI, ASME, NFPA, NACE.

2. Piping/Mechanical Engineer

Review and comment on mechanical / Piping engineering designs and engineering deliverables

of the oil and gas production facilities, includes review and comment on the mechanical design

concepts, criteria and specifications, checking mechanical analyses/calculations, and

implementing government regulations, industry codes and practices as per EPC Contract

requirements; and when request by company to perform any mechanical design activities with

reasonably company instructions

Perform design and independent calculation requested by company mechanical lead engineer

Perform cost estimation of Mechanical Major Equipments for owner estimate of EPC direct cost

Provide site engineering assistance as required during construction period and take an active

role to ensure acceptance of the facilities in accordance with contract requirement

Cost Estimation of Mechanical Major Equipments for Owner Estimate of EPC direct cost

Minimum requirements :

Have a bachelor of science degree in mechanical engineering

Ten (10) years experienced in the design and construction of oil and gas production facilities

Well knowledge on the applicable codes and standards

Have experience work with major EPC Contractor for Oil and Gas

Have ever been responsible for the mechanical design, analysis and review including two (2) or

more projects oil and gas

Well knowledge on the use and operating of teh various computer programs applicable to such

mechanical designs

Capable to ensure that the facilities and mechanical systems are designed,

fabricated/manufactured and tested in accordance with their codes and standards :

o American Petroleum Institute (API)

o American National Standards Institue (ANSI)

o National Fire Protection Association (NFPA)

o American Society of Mechanical Engineers (ASME)

o American Welding Society (AWS)

o American Gas Manufacturers' Association (AGA)

o Tubular Exchanger Manufacturer's Association (TEMA)

o National Association of Corrosion Engineers (NACE)

o American Society of Testing and Materials (ASTM)

3. Instrument Engineer

Review and comment on Instrument design and engineering deliverables of the oil & gas

production facilities prepared by Engineering and EPC Contractor;

Reviewing the instrument calculations, and implementing government regulations, industry

codes and practices.

Ensuring that the instrument and control systems are designed, in accordance with their

specifications, codes and standards stated in EPC Contract; and when required by COMPANY to

perform any engineering activities with reasonably instructions.

Provide design and calculations required and requested by COMPANY Lead Engineer –

Instrument.

Inspect instrument device during FAT and SAT

Communication with other discipline ( process, electrical, mechanical, piping, civil ) to ensure

that the design is properly and meet to COMPANY requirement.

Communication with other party i.e. EPC Contractor, BPMIGAS, MIGAS in order to instrument

work meet to COMPANY requirement including support obtaining license and certificate from

government ( MIGAS )

Min. requirement:

A bachelor science degree in physics or electrical engineering

5 (five) years experienced in oil & gas process design, and shall have ever been responsible

for and in charge of the design engineering and or construction of oil & gas facilities.

Well knowledge on the use and operating of the various computer softwares applicable to

such instrument designs.

Well familiar with the provisions of the codes, standards and recommended practices in oil

and gas industry such as ISA, API, ANSI, AGA, NFPA, IEC, etc

Having Telecommunication System acknowledgement is preferable.

4. Electrical Engineer

Review and comment EPC deliverables, assist and perform such required independent electrical

designs under the direction of the company Electrical Lead Engineer

Have the same educational requirements and proffesional qualifications as the senior electrical

engineer

Have experience minimum five (5) years in the electrical design of oil and gas production

facilities

A bachelor science degree in power system electrical engineering

Well known use and operate of the electrical various software application such as ETAP,

Chalmlite

Inspect electrical device during FAT and SAT

Communication with other discipline ( process, instrument, mechanical, piping, civil ) to ensure

that the design is properly and meet to COMPANY requirement.

Well familiar with the provisions of the codes, standards and recommended practices in oil and

gas industry such as NEC, API, NFPA, IEC, IP 15 etc

Communication with other party i.e. EPC Contractor, BPMIGAS, MIGAS in order to electrical

work meet to COMPANY requirement including support obtaining license and certificate from

government ( MIGAS )

5. Civil / Structural Engineer

Perform structural design and analysis calculations using governing codes & standards,

engineering formulas, skills, and experience.

Provide scope of work, monitoring and supervision of survey and soil investigation work, further

applicable to the design.

Layout and details portions of projects using schematic layout by project lead engineer. May be

assigned responsibility for schematic or conceptual layouts when qualified.

Research design options and document findings including review shop drawings.

Develop probable construction cost estimates.

Perform field activities such as observe and record existing field conditions, take and verify

measurements within project area.

Minimum requirements:

Bachelor degree of Civil Engineering

Minimum 7 years of industrial/construction design experience in oil & gas industry

Well knowledge and practical experience to operate computer software and analysis of the

result (SAP, STAAD, or other civil/structural software)

Understand industrial practice, international and Indonesian codes and standard (ACI, API, ASCE,

ASTM, AASHTO, AISC, API, SNI)

B. QUALITY ASSURANCE / QUALITY CONTROL

1. Pipemill Inspector

Bertanggung jawab kepada QA/QC Coordinator untuk semua kegiatan konstruksi yang terkait

dengan Quality Assurance dan Quality Control, termasuk mutu produk pipa ERW, line pipe, pipe

fitting serta valve.

Koordinasi dengan QC pabrik pipa untuk monitor quality produk pipa ERW ataupun seamless

Bertanggung jawab atas kualitas produk pipa ERW ataupun seamless yang dibeli dari pabrik pipa

dalam negeri ataupun luar negeri

Melakukan verifikasi proses pembuatan pipa ERW dari pipe mill hingga akhirnya produk comply

terhadap standard.

Melakukan verifikasi mill certificate yang dikeluarkan oleh pipe mill, baik dari pabrik dalam

negeri atau barang import untuk material pipa, valve, pipefitting.

Meyakinkan bahwa KONTRAKTOR telah melaksanakan pemeriksaan material: line pipe, pipe

fitting serta leak test valve yang dibeli oleh EPC KONTRAKTOR sebelum delivery ke job site.

Melakukan identifikasi material bekerja sama dengan pihak yang ditunjuk oleh PERUSAHAAN

jika ditemukan material yang tidak sesuai.

Berkoordinasi dengan KONTRAKTOR untuk semua aspek pemenuhan dokumentasi yang terkait

dengan SKPP dan SKPI.

Mewakili PERUSAHAAN dalam berkoordinasi dengan Migas dan/ atau pabrik pipa, pabrik valve,

atau pabrik fitting dalam hal pemeriksaan teknis peralatan/ materials.

Minimum requirements:

S1 Teknik Metalurgi atau Mechanical

Memiliki sertifikat pipeline inspector

Memiliki sertifikat welding inspector

Memiliki pengalaman 10 tahun di konstruksi pipeline

Familiar dengan standard code ASME, ASTM, ANSI, ANT TC 1A, API, DNV, SNI.

2. Electrical Inspector

Bertanggung jawab kepada QA/QC Coordinator untuk semua kegiatan konstruksi yang terkait

dengan Quality Assurance dan Quality Control

Berkoordinasi dengan QC KONTRAKTOR untuk pemeriksaan teknis alatalat listrik yang dibeli

KONTRAKTOR

Bertanggung jawab atas semua peralatan listrik yang dibeli EPC KONTRAKTOR, seperti pompa

listrik, genset, switch gear, MV and LV, MCC, trafo, switch breaker; telah dilakukan pengujian di

pabrik dan KONTRAKTOR telah melengkapinya dengan dokumen yang valid

Memastikan perakit peralatan listrik di dalam negeri telah memenuhi dan telah mampu

melakukan perkaitan dan pemubatan alat listrik di domestik,

Memastikan QC KONTRAKTOR telah melakukan pengujian alatalat listrik sesuai dengan

prosedur yang disetujui.

Memastikan QC KONTRAKTOR telah membeli peralatan/material yang sesuai dengan spesifikasi

yang ditetapkan.

Memerlukan verifikasi bahwa KONTRAKTOR telah melakukan merger test dan test lain yang

dibutuhkan.

Memastikan semua peralatan listrik yang dibeli telah memiliki dokumendokumen yang valid

dan acceptable untuk proses sertifikasi migas selanjutnya.

Koordinasi dengan perwakilan KONTRAKTOR di lapangan untuk melakukan SAT dengan

disaksikan petugas Migas

Akan bertindak sebagai perwakilan PERUSAHAAN dalam tahap SAT

Berkoordinasi dengan KONTRAKTOR untuk semua aspek pemenuhan dokumentasi yang terkait

dengan SKPP dan SKPI.

Mewakili PERUSAHAAN dalam berkoordinasi dengan Migas dalam hal pemeriksaan teknis

peralatan/ materials.

Minimum requirements:

Memiliki pengalaman 10 tahun di bidang peralatan listrik

Memahami pengujian peralatan listrik seperti: trafo, MCC, switch breaker, switch gear,

generator set, lightning arrestor, dll.

Paham dan mengerti single line diagram, schematic diagram, P&ID,

Menguasai macammacam electrical tool seperti mega ohm tester, multi tester, multi function

calibrator, high voltage tester

Menguasai standar instalasi motor, low and middle voltage cable, control panel, termination,

cable gland, conduit, grounding, cathodic protection, dll.

Memiliki pengalaman lapangan dalam konstruksi alatalat listrik seperti lightning arrestor, flame

arrestor, grounding tester, dll.

Familiar dengan standard code perlistrikan

Familiar dengan paket peralatan listrik dan pengalaman supervisi/ inspection lebih diutamakan,

3. Instrumentation Inspector

Bertanggung jawab kepada QA/QC Coordinator untuk semua kegiatan konstruksi yang terkait

dengan Quality Assurance dan Quality Control

Bertanggung jawab atas semua peralatan instrumentation yang dibeli oleh EPC KONTRAKTOR

seperti PSV, gas meter, telah dilakukan pengujian di pabrik dan telah dilengkapi dengan

dokumen yang valid.

Memastikan QC KONTRAKTOR telah melakukna pengujian alatalat instrumentation sesuai

dengan prosedur yang disetujui.

Memastikan QC KONTRAKTOR telah membeli peralatan/material yang sesuai dengan spesifikasi

yang ditetapkan

Melakukan verifikasi bahwa KONTRAKTOR telah melakukan function test dan test lain yang

diperlukan

Memastikan bahwa PCV, PSV, dan alatalat instrumentasi lainnya yang dibeli telah melalui

pengujian di pabrik dan telah lulus

Memastikan semua peralatan instrumentasi yang dibeli telah memiliki dokumnedokumen yang

valid dan acceptable untuk proses sertifikasi Migas selanjutnya

Memastikan bahwa gas meter yang difabrikasi telah sesuai dengan AFC drawingnya dan telah

diuji sesuai dengan ITP

Koordinasi dengan QC KONTRAKTOR untuk FAT gas meter, alat instrumentasi, dan kalibrasi alatalat

yang terkait dengan gas meter

Koordinasi dengan perwakilan KONTRAKTOR di lapangan untuk melakukan SAT dengan

disaksikan petugas Migas

Berkoordinasi dengan KONTRAKTOR untuk semua aspek pemenuhan dokumentasi yang terkait

dengan SKPP dan SKPI,

Mewakili PERUSAHAAN dalam berkoordinasi dengan Migas dalam hal pemeriksaan teknis

peralatan/ materials.

Minimum requirements:

Memiliki pengalaman 10 tahun di instrumentasi lapangan operasi migas

Mengerti instrument engineering document/drawing: specification, data sheet, wiring/loop

diagram, instalasi/hook up, P&ID

Mengerti prosedur testing untuk instrument: kalibrasi, leak test, continuity test, loop test,

function test dan SA (surge arrestor)

Mengerti prosedur sertifikasi termasuk dengan MIGAS/BPMIGAS: metering, PSV

4. Pressure Vessel and Tank Inspector

Bertanggung jawab kepada QA/QC Coordinator Perusahaan untuk semua kegiatan konstruksi

yang terkait dengan Quality Assurance dan Quality Control.

Bertanggung jawab terhadap semua aspek dan tahapan fabrkasi vessel dan tank yang dibeli

Kontraktor termasuk instrumentasinya seperti PSV, level glass, PCV, dll., telah dilakukan

pengujian di pabrik dan Fabrikator telah melengkapinya dengan dokumen yang valid.

Memastikan semua personnel fabrikasi yang bertanggung jawab atas fabrikasi tank vessel, telah

ditunjuk dan diberikan wewenang untuk memenuhi fabrikasi peralatan ini.

Memastikan fabrikator di dalam negeri telah memenuhi aspek konstruksi dan aspek level Migas.

Memastikan QC KONTRAKTOR telah melakukan pengujian alatalat pengujian sesuai dengan

prosedur yang disetujui.

Memastikan QC KONTRAKTOR telah membeli peralatan/material yang sesuai dengan spesifikasi

yang ditetapkan

Melakukan verifikasi bahwa KONTRAKTOR telah melakukan pemeriksaan material yang

digunakan serta melakukan test lain yang diperlukan.

Memastikan bahwa semua juru las, prosedur las dan prosedur pengetesan telah direview dan

disetujui serta semua sertifikat personnel sesuai dnegan kwalifikasinya.

Memastikan semua peralatan tes seperti pressure dan temperature gage, dead weight tester;

telah memenuhi validasi sertifikasinya.

Koordinasi dengan perwakilan KONTRAKTOR di lapangan untuk melakukan SAT dengan

disaksikan petugas Migas

Berkoordinasi dengan KONTRAKTOR untuk semua aspek pemenuhan dokumentasi yang terkait

dengan SKPP dan SKPI,

5. Civil/ Struktural/ Architectural Inspector

Job Description :

Bertanggung jawab kepada QA/QC Coordinator Perusahaan untuk semua kegiatan konstruksi

yang terkait dengan Quality Assurance dan Quality Control.

Bertanggung jawab semua pekerjaan fondasi, struktural maupun arsitektural dari fasilitas oil and

gas ...

Bertanggung jawab atas konstruksi overhead crane, pondasi beton untuk semua alatalat proses

produksi dan aspek arsitektural yang dibangun oleh Kontraktor.

Bertanggung jawab atas kebenaran spesifikasi teknis yang telah disetujui dalam kontrak atas

campuran beton untuk fondasi, kekuatan structural untuk rancanganoverhead crane serta aspek

arsitektural dari banunan, seperti : control room, operator room, dll.

Berkoordinasi dengan personnel kontraktor baik di work shop ataupun di lapangan agar dapat

semua pekerjaan diawasi untuk memperoleh mutu yang telah disepakati dalam design.

Berkoordinasi dengan kontraktor untuk pengujian sample beton baja tulang dan baja struktur

serta semen material sebelum dilakukan pengecoran untuk bangunan.

Bertanggung jawab atas material yang digunakan untuk structural overhead crane dan material

lainnya untuk structural.

Berkoordinasi dengan Kontraktor pada saat SAT untuk overhead crane dan kegiatankegiatan

lain yang memerlukan witness Migas.

Berkoordinasi dengan Kontraktor untuk semua aspek pemenuhan dokumentasiyang terkait

dengan SKPP dan SKPI.

Kualifikasi :

Memiliki pengalaman 10 tahun di civil foundation, truktural, arsitektural di daerang operasi

migas dan industry lainnya

Mengerti engineering doc/drawing : specifications, data sheet, gambar civil untuk darah operasi

Migas.

Mengerti prosedur testing untuk instrument : pile, bton, baja, onsite inspection.

Mnegerti prosedur sertifikasi termasuk dengan MIGAS/BPMIGAS

Memiliki pengalaman lapangan dalam pemeriksaan, pengujian dan isntalasi alat ukur dan

instrumentasi, seperti lightning arresor, flame arrestor, gas meter, dll.

Familiar dengan standar code instrumentation.

6. QC inspection documentation/ expeditor

Job Description :

Bertanggung jawab langsung kepada QA/QC Coordinator Perusahaan untuk semua kegiatan

konstruksi yang terkait dengan Quality Assurance dan Quality Control.

Bertanggung jawab kepada availability dokumen peralatan yang telah selesai fabrikasi dan telah

dipasang / selesai konstruksi di lapangan.

Menyiapkan semua keperluan dokumnetasi QA/QC termasuk pembuatan ARS ke Migas,

undangan Tes MIgas, menyiapkan jadwal pengujian, dkk

Berkoordinasi dengan KOntraktor untuk semua aspek pemenuhan dokumentasi yang terkait

dengan SKPP dan SKPI, misalnya mills certificate, COC dan COO.

Koordinasi dokumen KOntraktor yang diperlukan untuk sertifikasi peralatan dan instalasi.

Kualifikasi :

Berpengalaman dalam hal administrasi dokumen Migas, seperti SKPP dan SKPI

Memiliki pengalaman di administrasi proyek minimal 5 tahun (termasuk proyek non migas)

Familiar dengan dokumentasi PMTS

Mengerti alur teknis diutamakan

C. PLANNING & CONTROL

1. Plant & Schedule Analyst

Prepare and update the Overall Projects Schedule. The Projects Schedule will the basis for

execution and control the project progress to meet atimely completion

Prepare a weekly and a monthly report highlighting accomplishments and/or deviations to the

Project Schedule along with a list of upcoming milestone.

Monitor project progress and identify/analyze any schedule deviation during execution of the

project.

Review Contractors' CPM (Critical Path Method) schedule to ensure the contracts to be timely

completed.

Assist and perform such required independent EPC Project Planning & Control under the

direction of the senior planning & control engineer

Minimum Requirements:

S1 Teknik (semua jurusan)

Minimum Six (6) years in Project Planning, Scheduling and Control and in EPC Projects will be an

advantage.

Can operate Primavera, MS Projects, Ms Word and Ms Excel.

2. Contract Engineer

Develop and analyze subcontract documentation (interpretation of contract scope and terms

and conditions).

Provide advice and seek counsel on contractual, commercial, taxation, insurance and legal

issues.

Coordinate subcontracts development, compilation, sourcing, pretenders, invitation to tender,

evaluations of proposals received including requests for qualifications.

Post award coordination of Subcontract Variations, including evaluation of Subcontractor's

claims and defending claims from Subcontractors.

Participate in Subcontract audits, reviewing records for accuracy and conformance to standards.

Minimum requirements:

S1 Teknik (semua jurusan)

Minimum 10 years professional experience, 5 years Project Contracts experience in EPC projects

will be an advantage

Experience in contract formulation activities, systems and processes coupled with working

knowledge of engineering, fabrication and construction practices

Good skills in Ms Word and Ms Excel

3. Cost Control Analyst

Capable to estimate, plan, monitor and analyses cost

Update project cost report based on the data received from Finance Department every month.

Ensure that project costs are charged against the appropriate allocated accounts and advise the

Finance Department to revise incorrect charges.

Prepare cash flow status for the purpose of reporting and presentation.

Review contract document sections dealing with cost breakdown structure and payment

schedules to ensure compability with company accounting systems.

Update all contracts payment status and report on a monthly basis.

Perform sensitivity analysis on the estimates and cash flows forecasts to determine cash

requirements, potential problem areas, and corrective action to be taken and keep

management informed of the progress of the EPC Projects

Minimum requirements :

S1 Teknik semua jurusan

Seven (5) years experience in the cost and cash control and estimating of major oil and gas EPC

Projects

Have knowledge of applicable industry practices and estimating bases

Able to create estimating data bases from bids and/or actual expenditures and must have een

the principal engineer responsible for teh control of costs and cash flow on more than one other

similar project

Experienced in the use of computer progrms applicable to the control of costs and cash flows on

construction projects

4. Document Controler Analyst

Be responsible to control, handling, distributing all EPC documents and filing systematically

under company project control representative coordination/direction

Has necessary independence, authority and responsibility to manage document quality and

archiving

Minimum requirements :

Bachelor of science degree in an engineering related field plus three (3) years experience or

Diploma plus five (5) years experience as a document controller of major oil and gas EPC

projects

Have excellent detailed check and interpersonal skills, excellent written and oral communication

skill and superior planning

D. CONSTRUCTION

1. Construction Superintendent

Berkoordinasi dengan kontraktor dalam mengembangkan rencana konstruksi untuk

memastikan komunikasi dan pemahaman yang efektif mengenai kebutuhan dan

spesifikasi teknis yang dipersyaratkan oleh pihak engineering.

Mengawasi dan mengevaluasi kinerja hasil, kualitas dan kemajuan pekerjaan yang

dilakukan oleh kontraktor untuk memastikan tidak adanya penyimpangan serta

melakukan perbaikan secepatnya jika terdapat penyimpangan dalma proses konstruksi.

Mengendalikan pekerjaan kontraktor secara terintegrasi untuk memastikan seluruh

kegiatan konstruksi selesai secara tepat waktu dengan kualitas dan lingkup pekerjaan

yang telah dipersyaratkan di dalam desain teknis (engineering design)

Minimum requirements :

Sarjana Teknik Sipil atau Mesin

Pengalaman ± 7 10 Tahun

Kepemimpinan yang kuat

2. Field Construction Engineer – Mechanical / Piping

Shall be responsible for:

Control, review, check, inspect and supervise construction activities, especially in mechanical /

piping work;

analyzing on lifting of heavy equipment installation;

Resolves any contractual/legal matters and takes action.

Analyze exposure to risk and quantify potential for losses

Interface / mediate between various engineering disciplines and departments

Qualification requirements:

Candidate must possess at least a Bachelor's Degree in Mechanical / Chemical Engineering

At least 16 years of working experience in the related field is required for this position (Min. 10

years in construction of oilgas facilities, involving.: piping fabrication, installation work, welding

and its inspection on piping work, mechanical installation work, lifting of heavy equipment

installation, etc. Engineering Consultancy or EPC company in Oil & Gas sector),

Leadership, Communication skill & maturity

Team player, actionoriented, works effectively in a multicultural environment, proactive

Understand standard engineering specifications, Oil & Gas process codes and applicable

international codes, i.e.: ASME, API, ANSI, AWS, etc.

Demonstrate knowledge of various engineering discipline

Familiar with project specifications

Familiar with safety and environmental requirement

Familiar with reporting system

Speak and write English in good proficiency

3. Field Construction Engineer – Electrical

Shall be responsible for:

Control, review, check, inspect and supervise construction activities, especially in electrical

work;

Resolves any contractual/legal matters and takes action.

Analyze exposure to risk and quantify potential for losses

Interface / mediate between various engineering disciplines and departments

Qualification requirements:

Candidate must possess at least a Bachelor's Degree in Electrical Engineering

At least 16 years of working experience in the related field is required for this position (Min.

10 years in construction of oilgas facilities, involving.: GTG assemble, Switchgear, UPS, DCS,

ESS, SCADA installation, etc. Engineering Consultancy or EPC company in Oil & Gas sector),

Leadership, Communication skill & maturity

Team player, actionoriented, works effectively in a multicultural environment, proactive

Understand standard engineering specifications, Oil & Gas process codes and applicable

international codes, especially construction of upstream facilities

Demonstrate knowledge of various engineering discipline

Familiar with project specifications

Familiar with safety and environmental requirement

Familiar with reporting system

Speak and write English in good proficiency

4. Field Construction Engineer – Instrument

Shall be responsible for:

Control, review, check, inspect and supervise construction activities, especially in

instrumentation work;

Resolves any contractual/legal matters and takes action.

Analyze exposure to risk and quantify potential for losses

Interface / mediate between various engineering disciplines and departments

Qualification requirements:

Candidate must possess at least a Bachelor's Degree in Physical Engineering.

At least 16 years of working experience in the related field is required for this position (Min.

10 years in construction of oilgas facilities, involving.: GTG assemble, Switchgear, UPS, DCS,

ESS, SCADA installation, etc. Engineering Consultancy or EPC company in Oil & Gas sector),

Leadership, Communication skill & maturity

Team player, actionoriented, works effectively in a multicultural environment, proactive

Understand standard engineering specifications, Oil & Gas process codes and applicable

international codes, especially construction of upstream facilities

Demonstrate knowledge of various engineering discipline

Familiar with project specifications

Familiar with safety and environmental requirement

Familiar with reporting system

Speak and write English in good proficiency

5. Field Construction Engineer – Civil / Structure / Architectural

Shall be responsible for:

Control, review, check, inspect and supervise construction activities, especially in civil /

structural and architectural work.

Resolves any contractual/legal matters and takes action.

Analyze exposure to risk and quantify potential for losses

Interface / mediate between various engineering disciplines and departments

Qualification requirements:

Candidate must possess at least a Bachelor's Degree in Civil Engineering majoring structural,

and architectural

At least 16 years of working experience in the related field is required for this position (Min. 10

years in construction of oilgas facilities, involving.: civil / structural work, i.e.: concrete

foundation, piling, general building, steel structure fabrication and installation, sandblasting &

painting, etc. Engineering Consultancy or EPC company in Oil & Gas sector),

Leadership, Communication skill & maturity

Team player, actionoriented, works effectively in a multicultural environment, proactive

Familiar with oil & gas industries, especially construction of upstream facilities

Familiar with project specifications

Familiar with safety and environmental requirements

Familiar with reporting system

Ready to work at remote area (out of Java)

Speak and write English, good.

Please send your comprehensive and updated CV, recent photograph

and expected salary to:

nurinsan.kamil@dayadimensi.co.id or ketut.saguna@dayadimensi.co.id

Only qualified candidates will be notified
 

__._,_.___
Recent Activity:
--------------------------------------------------------------
Portal Industri : http://www.migas-indonesia.com
No E-mail (Web) : Migas_Indonesia-nomail@yahoogroups.com
Daily Digest    : Migas_Indonesia-digest@yahoogroups.com
Individual Mail : Migas_Indonesia-normal@yahoogroups.com
Administrator   : Migas_Indonesia-owner@yahoogroups.com
Mirror : http://groups.google.com/group/Migas-Indonesia-Google
Untuk pergantian alamat email dan pengiriman attachment
silahkan hubungi webmaster(at)migas-indonesia.com
HAPUS BAGIAN EMAIL YANG TIDAK DIPERLUKAN SEWAKTU REPLY
PENGIRIMAN ATTACHMENT KE MILIS HARUS MELEWATI ADMINISTRATOR
--------------------------------------------------------------
MARKETPLACE

Stay on top of your group activity without leaving the page you're on - Get the Yahoo! Toolbar now.

.

__,_._,___

No comments:

Post a Comment

LinkWithin2

Related Posts Plugin for WordPress, Blogger...
There was an error in this gadget
Jika anda merasa info ini berguna dan ingin mentraktir saya beli minuman, silahkan anda bisa mendonasikan sedikit rezeki anda dengan mengklik link dibawah ini:


Bisnis Tiket Pesawat Online

Disclaimer